A Comprehensive Research Review Regarding the Material Behavior of Concrete Filled Double Skin Tubes

Cintantya Budi Casita, Data Iranata, Budi Suswanto, Masahide Matsumura

Abstract

This study provides a detailed investigation of the material behavior of concrete-filled double-skin tubes (CFDST). The research primarily focuses on the development and examination of cross-sectional variations, stress-strain relationships in the materials, and their corresponding characteristics. By conducting a comprehensive study and evaluation, this research endeavors to provide a more profound comprehension of the impact of this particular behavior on the overall responsiveness and capacity of materials. The influence of various parameters on a variety of cross-sectional configurations, comprising circular outer and circular inner tubes (C-C), circular outer – square inner tubes (C-S), square outer – circular inner tubes (S-C), square outer – square inner tubes (S-S) have been recently examined in earlier research. Furthermore, this study discusses additional evaluations consisting of sandwiched concrete and the inner and outer steel components. Despite the substantial study conducted by CFDST, there is presently a lack of established guidelines or regulations pertaining to the design of composite structures. Consequently, it is imperative to acquire a comprehensive comprehension of the behavior exhibited by these materials. This understanding serves as essential for the development of design rules specific to CFDST composite structures. By performing consequently, the outcomes of this study can be effectively employed in the design, analysis, and optimization of the distinctive attributes associated with composite materials.

Keywords

CFDST; composite material; cross-sectional variation; sandwiched concrete; steel material

Full Text:

PDF

References

T. Perea, R. T. Leon, J. F. Hajjar, and M. D. Denavit, “Full-Scale Tests of Slender Concrete-Filled Tubes: Interaction Behavior,” J. Struct. Eng., vol. 140, no. 9, pp. 1–12, 2014, doi: 10.1061/(asce)st.1943-541x.0000949.

R. Imani, M. Bruneau, and G. Mosqueda, “Simplified Analytical Solution for Axial Load Capacity of Concrete-filled Double-skin Tube (CFDST) Columns Subjected to Fire,” Eng. Struct., vol. 102, pp. 156–175, 2015, doi: 10.1016/j.engstruct.2015.08.007.

C. B. Casita, B. Suswanto, and I. Komara, “Analytical Study of Rectangular Concrete-Filled Tubes (RCFT) Connections using Finite Element Analysis under Cyclic Loading,” Trends Sci., vol. 19, no. 17, pp. 1–15, 2022, doi: 10.48048/tis.2022.5746.

C. Hou and L. H. Han, “Analytical Behaviour of CFDST Chord to CHS Brace Composite K-joints,” J. Constr. Steel Res., vol. 128, pp. 618–632, 2017, doi: 10.1016/j.jcsr.2016.09.027.

S. S. Eom, Q. V. Vu, J. H. Choi, H. H. Park, and S. E. Kim, “Flexural Behavior of Concrete-filled Double Skin Steel Tubes with A Joint,” J. Constr. Steel Res., vol. 155, pp. 260–272, 2019, doi: 10.1016/j.jcsr.2018.12.012.

A. Xiamuxi and A. Hasegawa, “A Study on Axial Compressive Behaviors of Reinforced Concrete Filled Tubular Steel Columns,” J. Constr. Steel Res., vol. 76, pp. 144–154, 2012, doi: 10.1016/j.jcsr.2012.03.023.

T. H. Han, J. M. Stallings, and Y. J. Kang, “Nonlinear Concrete Model for Double-skinned Composite Tubular Columns,” Constr. Build. Mater., vol. 24, no. 12, pp. 2542–2553, 2010, doi: 10.1016/j.conbuildmat.2010.06.001.

K. Uenaka, H. Kitoh, and K. Sonoda, “Concrete Filled Double Skin Circular Stub Columns under Compression,” Thin-Walled Struct., vol. 48, no. 1, pp. 19–24, 2010, doi: 10.1016/j.tws.2009.08.001.

M. F. Hassanein, O. F. Kharoob, and Q. Q. Liang, “Behaviour of Circular Concrete-Filled Lean Duplex Stainless steel-carbon Steel Tubular Short Columns,” Eng. Struct., vol. 56, pp. 83–94, 2013, doi: 10.1016/j.engstruct.2013.04.016.

H. Shakir-Khalil, “Composite Columns of Double-skinned Shells,” J. Constr. Steel Res., vol. 19, no. 2, pp. 133–152, 1991, doi: 10.1016/0143-974X(91)90038-3.

X. L. Zhao and R. Grzebieta, “Strength and Ductility of Concrete Filled Double Skin (SHS Inner and SHS Outer) Tubes,” Thin-Walled Struct., vol. 40, no. 2, pp. 199–213, 2002, doi: 10.1016/S0263-8231(01)00060-X.

L. H. Han, Z. Tao, H. Huang, and X. L. Zhao, “Concrete-filled Double Skin (SHS outer and CHS inner) Steel Tubular Beam-columns,” Thin-Walled Struct., vol. 42, no. 9, pp. 1329–1355, 2004, doi: 10.1016/j.tws.2004.03.017.

P. Ayough, N. H. Ramli Sulong, Z. Ibrahim, and P. C. Hsiao, “Nonlinear Analysis of Square Concrete-filled Double-skin Steel Tubular Columns under Axial Compression,” Eng. Struct., vol. 216, no. May, p. 110678, 2020, doi: 10.1016/j.engstruct.2020.110678.

Y. Fang, Y. Wang, C. Hou, and B. Lu, “CFDST Stub Columns with Galvanized Corrugated Steel Tubes: Concept and Axial Behaviour,” Thin-Walled Struct., vol. 157, no. September, 2020, doi: 10.1016/j.tws.2020.107116.

S. Alqawzai, K. Chen, L. Shen, M. Ding, B. Yang, and M. Elchalakani, “Behavior of Octagonal Concrete-filled double-skin Steel Tube Stub Columns under Axial Compression,” J. Constr. Steel Res., vol. 170, p. 106115, 2020, doi: 10.1016/j.jcsr.2020.106115.

S. Wei, S. T. Mau, C. Vipulanandan, and S. K. Mantrala, “Performance of A New Sandwich Tube under Axial Loading,” Proc. - 1994 Annu. Task Gr. Tech. Sess. Struct. Stab. Res., pp. 223–237, 1994.

F. C. Wang and L. H. Han, “Analytical Behavior of Carbon steel-concrete-stainless Steel Double-skin tube (DST) used in Submarine Pipeline Structure,” Mar. Struct., vol. 63, no. September 2018, pp. 99–116, 2019, doi: 10.1016/j.marstruc.2018.09.001.

M. Elchalakani, X. L. Zhao, and R. Grzebieta, “Tests on Concrete Filled Double-Skin (CHS Outer and SHS Inner) Composite Short Columns under Axial Compression,” Thin-Walled Struct., vol. 40, no. 5, pp. 415–441, 2002, doi: 10.1016/S0263-8231(02)00009-5.

Y. F. Yang, L. H. Han, and B. H. Sun, “Experimental Behaviour of Partially Loaded Concrete Filled Double-skin Steel Tube (CFDST) Sections,” J. Constr. Steel Res., vol. 71, pp. 63–73, 2012, doi: 10.1016/j.jcsr.2011.11.005.

P. Ayough, N. H. R. Sulong, and Z. Ibrahim, “Analysis and Review of Concrete-filled Double Skin Steel Tubes under Compression,” Thin-Walled Struct., vol. 148, no. October 2019, p. 106495, 2020, doi: 10.1016/j.tws.2019.106495.

Z. Tao, L. H. Han, and X. L. Zhao, “Behaviour of Concrete-filled Double Skin (CHS Inner and CHS Outer) Steel Tubular Stub Columns and Beam-columns,” J. Constr. Steel Res., vol. 60, no. 8, pp. 1129–1158, 2004, doi: 10.1016/j.jcsr.2003.11.008.

Q. Q. Liang, “Nonlinear Analysis of Circular Double-skin Concrete-filled Steel Tubular Columns under Axial Compression,” Eng. Struct., vol. 131, pp. 639–650, 2017, doi: 10.1016/j.engstruct.2016.10.019.

J. B. Mander, M. J. N. Priestley, and R. Park, “Theorical Stress-Strain Model for Confined Concrete,” J. Struct. Eng, vol. 114, no. 8, pp. 1804–1826, 1988.

S. Popovics, “A Numerical Approach to The Complete Stress-strain Curve of Concrete,” Cem. Concr. Res., vol. 21, no. July, pp. 1154–1157, 1973.

M. Pagoulatou, T. Sheehan, X. H. Dai, and D. Lam, “Finite Element Analysis on The Capacity of Circular Concrete-filled Double-skin Steel Tubular (CFDST) Stub Columns,” Eng. Struct., vol. 72, pp. 102–112, 2014, doi: 10.1016/j.engstruct.2014.04.039.

P. Boeraeve, B. Lognard, J. Janss, J. C. Gérardy, and J. B. Schleich, “Elasto-plastic Behaviour of Steel Frame Works,” J. Constr. Steel Res., vol. 27, no. 1–3, pp. 3–21, 1993, doi: 10.1016/0143-974X(93)90003-B.

L. H. Han, G. H. Yao, and Z. Tao, “Performance of Concrete-filled Thin-walled Steel Tubes under Pure Torsion,” Thin-Walled Struct., vol. 45, no. 1, pp. 24–36, 2007, doi: 10.1016/j.tws.2007.01.008.

M. M. A. Khanouki, N. H. Ramli Sulong, M. Shariati, and M. M. Tahir, “Investigation of Through Beam Connection to Concrete Filled Circular Steel Tube (CFCST) Column,” J. Constr. Steel Res., vol. 121, pp. 144–162, 2016, doi: 10.1016/j.jcsr.2016.01.002.

W. Li and Y. X. Cai, “Performance of CFDST Stub Columns using High-strength Steel Subjected to Axial Compression,” Thin-Walled Struct., vol. 141, no. April, pp. 411–422, 2019, doi: 10.1016/j.tws.2019.04.021.

L. H. Han, Q. X. Ren, and W. Li, “Tests on Stub Stainless Steel-concrete-carbon Steel Double-skin Tubular (DST) Columns,” J. Constr. Steel Res., vol. 67, no. 3, pp. 437–452, 2011, doi: 10.1016/j.jcsr.2010.09.010.

DOI: https://doi.org/10.31284/j.jtm.2024.v5i1.5213

Refbacks

  • There are currently no refbacks.