|
Issue |
Title |
|
Vol 2, No 1 (2022): (April) |
Effect Stress and Vibration Analysis at NACA Airfoil towards Axial Fan Blade Performance |
Abstract
PDF
|
Eky Novianarenti, Muhammad Anis Mustaghfirin, Achmad Fardiansyah Abdillah |
|
Vol 4, No 1 (2024): (April) |
Effects of UV Exposure on the Physical, Chemical, and Mechanical Properties of Silica Microballoon Reinforced Epoxy Composites |
Abstract
PDF
|
Muhammad Yunus, Hosta Ardhyananta, Mas Irfan Purbawanto Hidayat, Afira Ainur Rosidah, Joddy Arya Laksmono, Jayatin Jayatin, Diah Susanti, Ade Mundari Wijaya |
|
Vol 4, No 1 (2024): (April) |
Evaluation of exhaust emissions of diesel engine using pyrolysis waste plastics fuel |
Abstract
PDF
|
Agung Sudrajad, Sunardi Sunardi, Imron Rosyadi, Deni Iskandar |
|
Vol 3, No 1 (2023): (April) |
Experimental Investigation of Heat Transfer in a Flat-wall Impinging Diesel Spray Flame under Diesel-like Conditions |
Abstract
PDF
|
Safiullah Safiullah, Samir Chandra Ray, Iis Rohmawati, Rizal Mahmud |
|
Vol 3, No 1 (2023): (April) |
Experimental Study of Spark Ignition Engine Performance under Different Electronic Control Units, Hole Injectors and Spark Plugs |
Abstract
PDF
|
Aureo Adriyanto Da Costa Amaral, Naili Saidatin, Hasan Syafik Maulana |
|
Vol 4, No 2 (2024): (October) |
Green Algae to Green Fuel: Optimizing the Composition of Bio-Oil Additive Mixture from the Pyrolysis Process and RON 90 for Enhanced Engine Performance |
Abstract
PDF
|
Apip Amrullah, Herry Irawansyah, Abdul Ghofur, Rachmat Subagyo, Rizal Mahmud, Obie Farobie |
|
Vol 2, No 1 (2022): (April) |
Influence of Fluid Inflow Rate on Performance Effectiveness of Shell and Tube Type Heat Exchanger |
Abstract
PDF
|
Adinda Shalsa Bellabunda Wardhani, Alifta Titania Labumay, Erlinda Ningsih |
|
Vol 4, No 1 (2024): (April) |
Lignite Coal Co-combustion Performance with Banana Tree Waste, Tree Leaves and Cow Dung Manure Blends for Emission Reduction During Power Generation |
Abstract
PDF
|
Mohammad Siddique, Abdulhalim Musa Abubakar, Suhail Ahmed Soomro, Hafeez-ur-Rehman Memon, Irnis Azura Zakarya, Tome Sylvain |
|
Vol 2, No 1 (2022): (April) |
Mechanical Properties of Sandwich Composite using Glass Fiber Reinforced Polymer as A Skin and 3D Printed Polylactic Acid as A Core |
Abstract
PDF
|
Muhammad Ridlwan, Faisal Arif Nurgesang, Rahmat Riza, Nur Muhammad Syafi'i |
|
Vol 4, No 1 (2024): (April) |
NDT Testing with Visual Testing Method in the Inside Upper Frame 6015 Area with GMAW Welding Based on 1E0099 |
Abstract
PDF
|
Aulia Fajrin, Lalu Giat Juangsa Putra, Recky Sutrisno |
|
Vol 3, No 2 (2023): (October) |
Numerical Performance Simulations of Four-Wheeled Cruise-controlled Vehicle on Road Surface |
Abstract
PDF
|
Desmas Arifianto Patriawan, Ahmad Anas Arifin, Bambang Pramujati |
|
Vol 1, No 2 (2021): (October) |
Numerical Study of The Power Plant Surface Condenser to Prevent High Pressure in Critical Areas |
Abstract
PDF
|
Eky Novianarenti, Ary Bachtiar Khrisna Putra, Setyo Nugroho, Arrad Ghani Safitra, Rini Indarti, Priyambodo Nur Ardi Nugroho, Mohammad Basuki Rahmat |
|
Vol 4, No 2 (2024): (October) |
Numerical study the effect of inlet and outlet ventilation configurations for passive cooling air conditioning system |
Abstract
PDF
|
Arrad Ghani Safitra, Lohdy Diana, Joke Pratilastiarso, Nur Hidayat |
|
Vol 4, No 1 (2024): (April) |
Optimization of Fused Deposition Modeling (FDM) Machine Parameters for Carbon Fiber Tensile Strength Using the Taguchi Method |
Abstract
PDF
|
Adimas Dwi Prayoga, Abdi Satryo Mukti, Rolland Darin Khalifah Mahameru, Willdan Rosyadi, Wahyu Dwi lestari |
|
Vol 4, No 1 (2024): (April) |
Optimization of Fused Deposition Modeling (FDM) Machine Process Parameters for Polylactic Acid (PLA) Surface Roughness Using the Taguchi Approach |
Abstract
PDF
|
Mochammad Willdan Rosyadi, Adimas Dwi Prayoga, Abdi Satryo Mukti, Rolland Darin Khalifah Mahameru, Wahyu Dwi lestari |
|
Vol 1, No 2 (2021): (October) |
Optimizing Effect of Wavy Leading Edge (WLE) in Rectangular Wing and Taper Wing |
Abstract
PDF
|
Iis Rohmawati, Hiroshi Arai, Hidemi Mutsuda, Takuji Nakashima, Rizal Mahmud |
|
Vol 1, No 1 (2021): (April) |
Pengaruh Bahan Bakar LPG Sistem Manifold Injeksi Terhadap Performa Single Cylinder Spark Ignition Engine |
Abstract
PDF
|
Rizal Mahmud, Nasrul Ilminnafik, Apip Amrullah, Achmad Aminudin |
|
Vol 4, No 2 (2024): (October) |
Performance and Emissions Investigation of Methanol-Butanol-Ethanol Accumulation as an Alternative Gasoline Mixture in Spark Ignition Engines |
Abstract
PDF
|
Gatot Setyono, Dwi Khusna, Navik Kholili, Nova Arizal Diantoro, Firman Dirga Saputra |
|
Vol 2, No 2 (2022): (October) |
Risk Assessment Strategy for Corrosion Under Insulation of Nano Technology Insulation on Geothermal Pipeline |
Abstract
PDF
|
Andiani Setia Wardani, Ekha Panji Syuryana, Sutarno Sutarno, Basuki Nugroho, Gian Ganjar Zatnika, Gusti Verhan Pratama, Moch. Salman Fadillah Suardana |
|
Vol 3, No 1 (2023): (April) |
Simulation Performance Analysis of Shell and Tube Heat Exchanger Using Comsol Multiphysics 5.6 Software |
Abstract
PDF
|
Yety Setyo Ningrum, Ririn Martin Erinda, Made Arsana, Erlinda Ningsih, Anthony Francis Rajan |
|
21 - 40 of 51 Items |
<< < 1 2 3 > >> |