The effect of time variation on the steels corrosion rate in 0.5 M H2SO4 solution

Afira Ainur Rosidah, Vuri Ayu Setyowati, Suheni Suheni, Rafly Rijayanto

Abstract


Previous researches have carried out studying the corrosion behavior of steels, the most frequently used steels are medium carbon steel, alloy steel, and stainless steel. This is due to their wide range of applications. So, corrosion behavior is necessary to be analyzed for every steel type because of its wide function. This study was aimed to analyze the corrosion rate, macrostructure, and the XRD results of the AISI 1045, AISI 4140, and SS 304 which represent every steel type. Then, the steels were exposed to the 0.5M H2SO4 solution with various corrosion times. The variation of the corrosion time was 48, 96, and 144 hours. The results of this study revealed that AISI 1045 showed the highest corrosion rate with the value of 183.7 mpy at 144 hours of the time variation. All specimens obtained an increase in the corrosion rate with the increase in the corrosion time. Furthermore, for the macrostructure results, AISI 1045 and AISI 4140 gave obvious rust on the surface of the specimens for all time variation. The corrosion spots appear in the time variation of 96 and 144 hours for SS 304 specimens. XRD analysis confirmed the presence of metal oxides as corrosion products.

Full Text:

PDF

References


S. Yin, D. Y. Li, and R. Bouchard, “Effects of strain rate of prior deformation on corrosion and corrosive wear of AISI 1045 steel in a 3.5 Pct NacI solution,” Metall. Mater. Trans. A Phys. Metall. Mater. Sci., vol. 38, no. 5, pp. 1032–1040, 2007.

E. B. Ramlee, P. B. Hussain, and N. B. Shaik, “Enhancing the lifetime and corrosion resistance of gears made of carbon steel,” Materwiss. Werksttech., vol. 51, no. 6, pp. 774–779, Jun. 2020.

A. Rajabipour and R. E. Melchers, “Service life of corrosion pitted pipes subject to fatigue loading and hydrogen embrittlement,” Int. J. Hydrogen Energy, vol. 43, no. 17, pp. 8440–8450, 2018.

W. Witoni, “KOROSI PADA PEREDAM SUARA (MUFFLER) TOYOTA KIJANG GRAND 94,” J. Tek. Mesin, vol. 6, no. April, pp. 16–21, 2019.

D. G. H. Adoe, W. Bunganaen, B. K. A. Mandala, P. Studi, and T. Mesin, “Analisis Pengaruh Temperatur Dan Perlakuan Korosi Terhadap Ketahanan Putus Tabung Silinder Asetilin Bermaterial Drum Besi Bekas (Baja AISI 1045),” Lontar J. Tek. Mesin Undana, vol. 07, no. 02, pp. 22–27, 2020.

A. A. Rosidah, V. A. Setyowati, and M. Choir, “Effect of Current and Coating Time on the Layer Thickness and Corrosion Rate of Electroplated AISI 1045,” SPECTA J. Technol., vol. 5, no. 1, pp. 99–104, 2021.

R. S. Irianty and Khairat, “Ekstrak Daun Pepaya sebagai Inhibitor Korosi pada Baja AISI 4140 dalam Medium Air Laut,” J. Teknobiologi, vol. IV, no. 2, pp. 77–82, 2013.

L. T. Moli, N. Wahab, M. Gopinathan, K. Karmegam, and M. Maniyarasi, “Effects of gaseous nitriding AISI4140 alloy steel on corrosion and hardness properties,” in IOP Conference Series: Materials Science and Engineering, 2016, vol. 152, no. 1, pp. 1–6.

F. Bahar, “ANALISIS LAJU KOROSI MATERIAL BEJANA TEKAN PWR DALAM BERBAGAI KONSENTRASI H2SO4 DAN TEMPERATUR,” Sigma Epsil., vol. 14, no. 1, pp. 10–13, 2010.

M. Meryanalinda, A. S. Umartono, and D. Setiawan, “Analisa Laju Korosi Material Stainless Steel Grade SS304 dan Alloy UNS N08020 Terhadap Asam Sulfat dan Natrium Hidroksida,” Wahana Tek., vol. 09, no. 01, pp. 39–43, 2020.

S. R. Kumar, S. D. Krishnaa, M. D. Krishna, N. T. Gokulkumar, and A. R. Akilesh, “Investigation on corrosion behaviour of aluminium 6061-T6 alloy in acidic, alkaline and salt medium,” in Materials Today: Proceedings, 2021, vol. 45, pp. 1878–1881.

D. Clover, B. Kinsella, B. Pejcic, and R. De Marco, “The influence of microstructure on the corrosion rate of various carbon steels,” J. Appl. Electrochem., vol. 35, no. 2, pp. 139–149, 2005.

M. Tampubolon, R. G. Gultom, L. Siagian, P. Lumbangaol, and C. Manurung, “Laju Korosi Pada Baja Karbon Sedang Akibat Proses Pencelupan Pada Larutan Asam Sulfat (H2SO4) dan Asam Klorida (HCl) dengan Waktu Bervariasi,” Sprocket J. Mech. Eng., vol. 2, no. 1, pp. 13–21, 2020.

E. Febriyanti, A. Suhadi, and J. Wahyuady, “Pengaruh Waktu Perendaman dan Penambahan Konsentrasi Nacl (PPM) terhadap Laju Korosi Baja Laterit,” SINTEK J., vol. 11, no. 2, pp. 79–87, 2017.

A. J. Sinaga and C. Manurung, “Analisa Laju Korosi dan Kekerasan Pada Stainless Steel 316 L Dalam Larutan 10 % NaCl Dengan Variasi Waktu Perendaman,” Sprocket J. Mech. Eng., vol. 1, no. 2, pp. 92–99, 2020.

I. Y. Suleiman, O. B. Oloche, and S. A. Yaro, “The Development of a Mathematical Model for the Prediction of Corrosion Rate Behaviour for Mild Steel in 0.5 M Sulphuric Acid,” ISRN Corros., vol. 2013, pp. 1–9, 2013.

M. N. Muhsinin and B. A. Kurniawan, “Pengaruh Polutan Terhadap Karakteristik dan Laju Korosi pada Baja AISI 1045 dan Stainless Steel 304 di Lingkungan Muara Sungai,” J. Tek. POMITS, vol. 1, no. 1, pp. 1–5, 2012.

H. Jodi, “Karakterisasi Korosi Baja SS-430 pada lingkungan NaCl,” Pus. Teknol. Bahan Ind., vol. 13, no. 3, pp. 149–155, 2007.

A. P. S. Jasbir Singh, Sandeep Sharma, “Oxidation Effects on wear Resistance of SS-304 and SS-316 Austenitic Stainless Steels,” Int. J. Innov. Technol. Explor. Eng., vol. 8, no. 10, pp. 2353–2357, 2019.




DOI: https://doi.org/10.31284/j.jmesi.2021.v1i2.2183

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.