Analisis Yield Bahan Bakar Cair pada Pirolisis Ban Luar Sepeda Motor Dengan Katalis ?-Alumina dengan Pendekatan Anova

Erlinda Ningsih

Abstract


ABSTRACT

In the rainy season the accumulation of tire waste has the potential to become a breeding ground for mosquitoes and animals that have the potential to spread disease, while in the dry season the accumulation of waste is very vulnerable and has the potential to cause fires that produce toxic gases that are harmful to the environment. Pyrolysis can be an alternative solution to reduce the amount of tire waste by converting it into alternative fuels. Pyrolysis was carried out using waste tires and motorcycle tires with -alumina as catalyst. The purpose of this study was to analyze the effect of reactor temperature and ratioalumina catalyst ratio on liquid fuel yield using the ANOVA approach. The pyrolysis process lasted for 2 hours with variations in reactor temperature, namely 400oC, 450oC, and 500oC. Variations in the ratio of catalyst and tire are 1:100, 3:100, 5:100, and without catalyst. The results of the analysis using the Anova approach concluded that the reactor temperature and the catalyst ratio had an effect on the yield of the outer tire liquid fuel. At a ratio of 5:100 and a temperature of 500oC produces the largest yield of 35.34%

Keywords: pyrolysis, ?-alumina, tires, fuel, Anova

a, tires, fuel, Anova

 


Full Text:

PDF

References


DAFTAR PUSTAKA

D. Czajczy?ska, R. Krzy?y?ska, H. Jouhara, and N. Spencer, “Use of pyrolytic gas from waste tire as a fuel: A review,” Energy, vol. 134, pp. 1121–1131, 2017, doi: 10.1016/j.energy.2017.05.042.

M. R. Islam, M. N. Islam, N. N. Mustafi, M. A. Rahim, and H. Haniu, “Thermal recycling of solid tire wastes for alternative liquid fuel: The first commercial step in Bangladesh,” Procedia Eng., vol. 56, pp. 573–582, 2013, doi: 10.1016/j.proeng.2013.03.162.

N. M. Mkhize, P. van der Gryp, B. Danon, and J. F. Görgens, “Effect of temperature and heating rate on limonene production from waste tyre pyrolysis,” J. Anal. Appl. Pyrolysis, vol. 120, pp. 314–320, 2016, doi: 10.1016/j.jaap.2016.04.019.

K. Udyani, E. Ningsih, and M. Arif, “Pengaruh Temperatur Pirolisis Terhadap Yield Dan Nilai Kalor Bahan Bakar Cair Dari Bahan Limbah Kantong Plastik,” Semin. Nas. Sains dan Teknol. Terap. VI, no. 2013, pp. 389–394, 2018.

N. Fanani et al., “Konversi plastik hdpe menjadi fuel melalui proses pirolisis,” pp. 452–456, 2017.

F. Mabood, M. R. Jan, J. Shah, F. Jabeen, and Z. Hussain, “Catalytic pyrolysis of waste inner rubber tube into fuel oil using alumina and calcium carbonate base catalysts,” J. Chem. Soc. Pakistan, vol. 33, no. 1, pp. 38–42, 2011.

H. Toutenburg, Mathematical statistics with applications, 4th edition, vol. 13, no. 1. 1992.

W. W. Mandala, M. S. Cahyono, S. Ma’arif, H. Sukarjo, and W. Wardoyo, “Pengaruh Suhu terhadap Rendemen dan Nilai Kalor Minyak Hasil Pirolisis Sampah Plastik,” J. Mek. dan Sist. Termal, vol. 1, no. 2, pp. 49–52, 2016.




DOI: https://doi.org/10.31284/p.snestik.2021.1875

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Erlinda Ningsih

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.