Analisis Potensi Musculoskeletal Disorder Pada Pekerja Unloading Material Galian C di Kawasan Tambang Gunung Merapi

Ibnu Abdul Rosid, Maria Gratiana Dian Jatiningsih, Vigna Shindy Culatta, Dewi Chandra Nur Setyawati

Abstract

Stone is one of the C type materials from the eruption of Merapi volcano which is a commodity for the people around it. The process of transferring the materials to consumers uses a mode of transportation in the form of trucks. There are two types of trucks that be used, it are dump trucks and non-dump trucks. Non-dump trucks, the process of unloading material is used manually technique, using human power. In the unloading process, problems in the form of work postures were found to have the potential to cause musculoskeletal disorders. The method used in this study to analyze the working conditions using RULA. The results of measurements using the RULA method obtained a final score in the process of lifting the material, the maximum score is 7. Meanwhile, in the process of lifting stone material for transfer or unloading, the final score is 7. So it was concluded that the activity process has the potential to affect the health of workers. and further investigation and improvement of work processes are required as soon as possible.

Full Text:

46-53

References

Lasino, A. T. Dachlan, and R. Setiadji, “Pemanfaatan Pasir Merapi Untuk Beton Mutu Tinggi (Usage of Merapi Sand for High-Grade Concrete),” J. Jalan-Jembatan, vol. 32, no. 1, pp. 16–31, 2015.

R. Hasnur, D. R. Panggabean, and I. W. Warmada, “Hubungan Karakteristik Sedimentologis Dengan Kekuatan Campuran Pasir dan Semen : Studi Kasus Pasir Hasil Erupsi Gunung Merapi dan Pasir Pantai Parangtritis,” in Pertemuan Ilmiah Tahunan IAGI ke-37, 2008, pp. 644–651.

B. Endroyo, “Kualitas Pasir Muntilan (Jawa Tengah) Ditinjau Dari Tempat Pengambilan Dan Musim Pengambilan,” Wahana Tek. SIPIL, vol. 12, no. 1, pp. 1–8, 2007.

B. Widyastomo and Risyanto, “Pengaruh Penambangan Pasir dan Batu Terhadap Kondisi Sosial Ekonomi Penambang di Kecamatan Kemalang Kabupaten Klaten, Provinsi Jawa Tengah,” J. Bumi Indones., vol. 2, no. 3, pp. 270–276, 2013.

Suhartini, “Fenomena Penambangan Pasir dan Pembangunan Beserta Dampak Lingkungan yang Ditimbulkannya ( Studi Kasus di Sekitar Merapi dan di Kabupaten Bantul ),” in Seminar Nasional MIPA, 2006.

W. B., R. L., and Hamidin, “Kemampuan Tampungan Sungai Code Terhadap Material Lahar Dingin Pascaerupsi Gunungapi Merapi Tahun 2010,” J. Sains Teknol. Lingkung., vol. 3, no. 2, pp. 81–87, 2011.

B. Suhardi, K. B. M, and R. D. A, “Improvement Of Work Posture In Yarn Removal Operator To Reduce Risk Of Musculoskeletal Disorders,” Artic. Int. J. Sci. Technol. Res., vol. 10, no. 02, pp. 230–236, 2021.

I. S. A. Wijaya and A. Muhsin, “Analisa Postur Kerja Dengan Metode Rapid Upper Limb Assessment (Rula) Pada Oparator Mesin Extruder Di Stasiun Kerja Extruding Pada Pt Xyz,” Opsi, vol. 11, no. 1, p. 49, 2018.

T. I. Oesman and R. A. Simanjuntak, “Analisis Postur Kerja dengan Risk Assessment Methods pada Penambang Pasir,” in Seminar Nasional “Industrial Services,” 2011, pp. 72–80.

S. Yazdanirad, A. H. Khoshakhlagh, E. Habibi, A. Zare, M. Zeinodini, and F. Dehghani, “Comparing the Effectiveness of Three Ergonomic Risk Assessment Methods— RULA, LUBA, and NERPA—to Predict the Upper Extremity Musculoskeletal Disorders,” Indian J. Occup. Int. Med., vol. 22, no. 1, pp. 17–21, 2018.

W. Sutari, Y. N. D. Yekti, M. D. Astuti, and Y. M. sari, “Analysis of Working Posture on Muscular Skeleton Disorders of Operator in Stamp Scraping in ‘Batik cap’ Industry,” Procedia Manuf., vol. 4, no. Iess, pp. 133–138, 2015.

D. K. Kushwaha and P. V. Kane, “Ergonomic assessment and workstation design of shipping crane cabin in steel industry,” Int. J. Ind. Ergon., vol. 52, pp. 29–39, 2016.

Y. K. Kong, S. yong Lee, K. S. Lee, and D. M. Kim, “Comparisons of ergonomic evaluation tools (ALLA, RULA, REBA and OWAS) for farm work,” Int. J. Occup. Saf. Ergon., vol. 24, no. 2, pp. 218–223, 2018.

D. Al Madani and A. Dababneh, “Rapid entire body assessment: A literature review,” Am. J. Eng. Appl. Sci., vol. 9, no. 1, pp. 107–118, 2016.

S. M. Yarandi et al., “Effectiveness of Three Ergonomic Risk Assessment Tools, Namely NERPA, RULA, and REBA, for Screening Musculoskeletal Disorders,” Arch. Environ. Health, vol. 8, no. 3, pp. 188–201, 2019.

E. Chanty, “Analisis Fasilitas Kerja Dengan Pendekatan Ergonomi REBA dan RULA di Perusahaan CV.Anugerah Jaya,” J. Tek. Ind., vol. 22, no. 01, pp. 87–93, 2019.

M. Lynn and E. N. Corlett, “RULA: a survey method for the investigation of work-related upper limb disorders,” Appl. Ergon., vol. 24, no. 2, pp. 91–99, 1993.

A. Hanafi and A. Haslindah, “Evaluation of Work Position Using Subyectivity Approach Based on RULA Method,” J. Ind. Eng. Manag., vol. 6, no. 2, pp. 70–78, 2021.

DOI: https://doi.org/10.31284/j.senopati.2022.v4i1.3184

Refbacks

  • There are currently no refbacks.