Alat Mengetahui Presentase Normalisasi Oksigen di Dalam Tubuh Manusia Berbasis Sensor dan Aplikasi Blynk

Yuli Wahyuni, Syahjila Pan Wahid

Abstract


Kesehatan menjadi salah satu prioritas utama masyarakat. Saturasi oksigen darah (SpO2) merupakan indikator penting untuk memantau kesehatan, khususnya bagi pasien dengan penyakit pernapasan. Penelitian ini bertujuan untuk merancang alat pemantau SpO2 yang portable, terjangkau, dan berbasis IoT (Internet of Things) menggunakan sensor MAX30102, NodeMCU, dan layar OLED 0,96 inci. Alat ini memanfaatkan konektivitas WiFi untuk mengirim data SpO2 ke platform Blynk, memungkinkan pemantauan jarak jauh secara real-time. Hasil pengujian telah berhasil mengetahui kadar oksigen darah berdasarkan pengukuran sinyal cahaya inframerah dan merah yang diterima oleh sensor MAX30102. Alat ini menggunakan prinsip photoplethysmography (PPG), di mana sensor mengukur perubahan intensitas cahaya yang dipantulkan oleh darah dalam pembuluh kapiler di bawah kulit. Selanjutnya pengujian telah dilakukan dengan 20 pasien menghasilkan 15 pasien normal dan 5 pasien tidak normal.

Keywords


Presentase, Normalisasi, Oksigen, Aplikasi Blynk, Sensor.

Full Text:

PDF

References


R. &. D. K. Brown, “Performance of MAX30102 in Sp02 Monitoring Applications.,” Sensors Journal, pp. 875-882, 2019.

L. e. a. Zhang, “IoT in Healthcare: Oppurtunities and challenges,” IEEE Transactions on Biomedical Engineering, pp. 2453-2464, 2021.

S. e. a. Kumar, “Blynk-Based IoT Systems for home health Monitoring,” Proceedings of the international Conference on IoT, pp. 55-60, 2020.

M. e. a. Raut, “Low-Cost Health Monitoring Systems Using OLED and IoT,” International Journal of Advanced Research in Electronics, pp. 112-118, 2022.

T. P. Smith J., “Oxygen Saturation Monitoring in Clinical Practice,” Journal of Medical Health, 2020.

K. &. S. N. Patel, “ Blynk Applications in IoT-Based Health Monitoring Systems,” International Journal of IoT Research, vol. II, no. 10, pp. 75-83, 2022.

M. &. L. T. Johnson, “The Role of SpO2 Monitoring in Chronic Respiratory Diseases,” Medical Devices Review, vol. II, no. 34, pp. 87-95, 2020.

H. e. a. Green, “Comparative Study of Traditional Pulse Oximeters and IoT-Based Health Devices,” Journal of Medical Innovations, vol. V, no. 21, pp. 45-52, 2019.

R. e. a. Ahmed, “IoT-Enabled Health Monitoring: A Review of Recent Advances,” Journal of Biomedical IoT, vol. III, no. 9, pp. 102-118, 2021.

P. &. H. J. Clark, “Evaluation of MAX30102 for Accurate SpO2 and Heart Rate Measurement,” Sensors & Systems, 2021.

D. e. a. Roberts, “OLED Displays in Portable Health Devices: A Technical Review,” Advances in Electronics and Design, 2020.

A. D. &. W. S. Prasetyo, “Implementasi Sensor MAX30102 pada Pemantauan Kesehatan Berbasis IoT,” Seminar Nasional Informatika 2019, pp. 123-128, 2019.

R. &. S. B. Wahyuni, “Integrasi OLED 0.96 inch I2C dalam Pemantauan Data Kesehatan,” Jurnal Sistem Informasi dan Komputerisasi, vol. X, no. 3, pp. 112-118, 2022.

T. &. S. R. Haryono, “Pemanfaatan IoT untuk Pemantauan Kesehatan Jarak Jauh,” Jurnal Teknologi Informasi dan Ilmu Komputer, vol. 8, no. 4, p. 432–441., 2021.

T. &. R. H. Siswanto, “Siswanto, T., & Riyanto, H. (2020). OLED Display in IoT Systems: A Study of Visualization and Performance. Journal of Electronics and Applications, 5(2), 97–105.,” OLED Display in IoT Systems: A Study of Visualization and Performance, vol. 5, no. 2, pp. 97-105, 2020.

J. &. T. P. Smith, “Oxygen Saturation Monitoring in Clinical Practice,” Journal of Medical Health, vol. 45, no. 3, pp. 120-125, 2020.

F. Gunawan, “PEMANTAUAN DETAK JANTUNG DAN SATURASI OKSIGEN DALAM DARAH BERBASIS IOT MENGGUNAKAN SENSOR MAX30102,” Diss. Fakultas Teknik Universitas Sultan Ageng Tirtayasa, 2023.

Y. F. A. a. I. A. Wahyuni, “"Application of Pregnant Mom's Diet Based on Raspberry PI Using Telegram Chatbot.",” Journal of Applied Engineering and Technological Science (JAETS), vol. 4, no. 1, pp. 209-214, 2022.

M. I. A. M. a. Y. W. Ramdhani, “"Prototipe Alat Pendeteksi Kebakaran Berbasis Nodemcu Dan Aplikasi Telegram.",” Jurnal Aplikasi Bisnis dan Komputer , vol. 3, no. 2, pp. 45-54, 2024.

D. a. A. I. Hasan, “"Designing ECG monitoring healthcare system based on internet of things blynk application.",” Journal of applied science and technology trends, vol. 1, no. 2, pp. 106-111, 2020.

S. N. H. R. a. F. L. Fadlilah, “"Analisis Faktor Yang Mempengaruhi Tekanan Darah Dan Saturasi Oksigen Perifer (Spo2).",” Jurnal Kesehatan Kusuma Husada, pp. 21-30, 2020.

U. Salamah, “"Rancang Bangun Pulse Oximetry Menggunakan Arduino Sebagai Deteksi Kejenuhan Oksigen Dalam Darah.",” Jurnal Penelitian Fisika dan Aplikasinya (JPFA), vol. 6, no. 2, pp. 77-82, 2016.

M. Rochmad, “"DETEKSI KADAR SATURASI OKSIGEN DARAH (SpO2) DAN DETAK JANTUNG SECARA NON-INVASIF DENGAN SENSOR CHIP MAX30100.",” Jurnal Nasional Teknologi Terapan (JNTT), vol. 4, no. 1, 2022.

P. Y. Mallo, “"Rancang Bangun Alat Ukur Kadar Hemoglobin dan Oksigen Dalam Darah dengan Sensor Oximeter Secara Non-Invasive.",” Jurnal Teknik Elektro dan Komputer, vol. 1, no. 1, 2012.

A. S. a. Y. M. Hyperastuty, “"Monitoring Saturasi Oksigen Menggunakan SPO2 MAX 3010 Berbasis Android.",” Indonesian Journal of Professional Nursing , vol. 2, no. 1, pp. 1-6, 2021.

Y. Wahyuni, “"Portable Device for Measuring Heart Rate of Pregnant Women Based on Ip Address With BPM Graph Display.",” Indonesian Journal of Artificial Intelligence and Data Mining , vol. 7, no. 1, pp. 22-27, 2024.

C. R. Nugroho, “Alat pengukur saturasi oksigen dalam darah menggunakan metode PPG reflectance pada sensor MAX30100. BS thesis.,” Fakultas Sains dan Teknologi Universitas Islam Negeri Syarif Hidayatullah Jakarta, 2019., 2019.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Yuli Wahyuni

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.