The Effect of Tread Pattern Tires on Hard Compound Coefficient Rolling Resistance

Thatit Widya A.P, Muh Nurkoyim Kustanto, Hari Arbiantara B, Franciscus Xaverius K, Robertoes Koekoeh K.W

Abstract


Rolling resistance is the resistance of a wheel that will roll or rotate due to friction between the outer surface of the wheel and the track surface. This study aims to determine the effect of tread patterns on the coefficient of rolling resistance. The tires that will be used in this study are hard compounds with a ratio pattern and tread pattern raised by 2 mm with a tire hardness of 79.5 Ha, and using pressure variations at 30 Psi, 40 Psi, and 50 Psi. Coefficient value rolling resistance is 1.39% with a rolling resistance of 8.05 N. These results are produced by a hard compound with a tread pattern of 2 mm at a pressure of 50 Psi. Meanwhile, the rolling is 2.04% with a rolling resistance of 11.82 N. These results are produced by hard compound tires with a pattern at a tire pressure of 30 Psi.

Keywords: compound, tread pattern, rolling resistance

Full Text:

PDF

References


H. Naser, B. Safari dan K. Atmojo, “Peran Serikat Pekerja Dalam Menghadapi Revolusi Industri 4.0 Pada Sektor Industri Otomotif,” Jurnal Ilmu Menejemen Dan Akutansi, pp. 33-40, 2020.

H. Y. Laka dan C. Sasmito, “Manajemen Strategi Kebijakan Publik Sektor Pariwisata di Desa Pujon Kidul Kecamatan Pujon Kabupaten Malang Jawa Timur pada Era Industri 4.0,” Ilmu Manajemen dan Akuntansi, vol. 1, pp. 28-36, 2019.

A. Efendi, “Rancang Bangun Mobil Listrik Sula Politeknik Negeri Subang,” Jurnal Pendidikan Teknologi dan Kejuruan, pp. 75-84, 2020.

M. J. Nyaga, “Developing And Building A Prototype Rear Wheel Drive Electric Car,” 2009.

C. O. Quandt dan S. Innovation, “Manufacturing the electric vehicle : a window of technologica opportunity for Southern California,” 2014.

M. Juhala, “Improving Vehicle Rolling Resistance and Aerodynamics,” Aalto University, 2014.

M. Juhlin, “Assessment of crosswind performance of buses,” Royal Institute of Technology, 2009.

D. L dan M. Juhlin, “Aerodynamic loads on buses due to crosswind gusts – extended analysis,” Vehicle System Dynamics, vol. 48, pp. 287-297, 2010.

M. R, B. F dan R. J. (eds), “The Aerodynamics of Heavy Vehicles: Trucks, Buses, and Trains,” Lecture Notes in Applied and Computational Mechanics, vol. 19, 2004.

H. Taghavifar, “Investigating The Effect of Velocity, Inflation Pressure, And Vertical Load On Rolling Resistance Of A Radial Ply Tire,” Journal of Terramechanics, vol. 50, pp. 99-106, 2013.

M. Ihsan.P, “Analisis Rolling Resistance Pada Singgel Row Deep Groove Ball,” Universitas Jember, 2019.

M. Muttaqin, “Pengaruh Tekanan Udara (Inflation Pressure) pada Ban Tipe Radial Ply terhadap Rolling Resistance,” Jurnal Rotor, vol. 8, 2015.

W. Wei, “Numerical and experimental studies of a radial truck tire with tread,” Transactions of the Society for Modeling and Simulation International 2015, vol. 91, pp. 970-979, 2015.

P. S, Y. W dan C. J, “Pressure-sensing pad test and computer simulation for the pressure distribution on the contact patch of a tyre,” dalam Proceedings of the Institution of Mechanical Engineers, 2007.

E. Sakai, “Measurement and visualization of the contact pressure distribution of rubber disks and tires,” Tire Science Technology, Vol. 1 238-255, 1995.




DOI: https://doi.org/10.31284/j.jmesi.2022.v2i2.3058

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.