Analyzing the roughness of the discontinuous surface in Mt. Semeru Eruption rock
Abstract
From the moment they were formed to the deposition process, the characteristics and properties of rocks that form on the earth's surface vary. The effects of Mount Semeru's eruption will be transported and deposited, eventually solidifying into rock masses. As a result of weak places like joints, fractures, and fissures, where the density, filling, and orientation are not continuous, rock masses in nature have discontinuous or discontinuous qualities. Rock shear strength will be decreased if there are discontinuous planes in the rock bulk. Using Barton's empirical equation and the Joint Roughness Coefficient (JRC) parameter, roughness conditions in discontinuous planes can be measured. Determining the features of the rock mass that are influenced by the shear strength of discontinuous planes in the Mount Semeru eruption rock based on variations in shear roughness in accordance with Barton and Choubey's criterion is therefore crucial. The observation of discontinuous plane roughness conditions in rocks as a result of Mount Semeru's eruption is necessary to get many rock shear strength parameters, which are then used to determine the friction angles, undulation values, and cohesion values in the surface of the discontinuous plane.
Full Text:
PDFReferences
R. E. Goodman, Introduction to Rock Mechanics. John Wiley & Sons, 1991.
E. Hoek, P. K. Kaiser, and W. F. Bawden, Support of Underground Excavations in Hard Rock. CRC Press, 2000.
L. Siebert, T. Simkin, and P. Kimberly, Volcanoes of the World. Univ of California Press, 2011.
J. McPhie, Volcanic Textures: A Guide to the Interpretation of Textures in Volcanic Rocks, 1993.
C. G. Newhall and S. Self, "The volcanic explosivity index (VEI) an estimate of explosive magnitude for historical volcanism," Journal of Geophysical Research: Oceans, vol. 87, no. C2, pp. 1231-1238, 1982.
L. Siebert, T. Simkin, and P. Kimberly, Volcanoes of the World. Univ of California Press, 2011.
P. Francis, Volcanoes. A Planetary Perspective, 1993.
N. Barton and V. Choubey, "The shear strength of rock joints in theory and practice," Rock Mechanics, vol. 10, pp. 1-54, 1977.
N. Barton, "Review of a new shear-strength criterion for rock joints," Engineering Geology, vol. 7, no. 4, pp. 287-332, 1973.
B. Ladanyi and G. Archambault, "Simulation of shear behavior of a jointed rock mass," in The 11th US Symposium on Rock Mechanics (USRMS), 1969.
G. Grasselli, "Shear strength of rock joints based on quantified surface description," EPFL, no. THESIS, 2001.
E. Hoek and J. D. Bray, Rock Slope Engineering. CRC Press, 1981.
F. D. Patton, "Multiple modes of shear failure in rock," in 1st ISRM Congress, 1966.
N. Barton and S. Bandis, "Effects of block size on the shear behavior of jointed rock," in The 23rd US Symposium on Rock Mechanics (USRMS), 1982.
R. Mines, Rock Characterization Testing and Monitoring ISRM Suggested Methods. 1981.
J. A. Hudson and J. P. Harrison, Engineering Rock Mechanics: An Introduction to the Principles. Elsevier, 2000.
G. P. Giani, Rock Slope Stability Analysis. CRC Press, 1992.
D. C. Wyllie and C. Mah, Rock Slope Engineering. CRC Press, 2004.
E. Widijanto, R. K. Wattimena, S. Kramadibrata, and M. A. Rai, "Geometry effects on Slope Stability at Grasberg Mine Through the Transsition from Open Pit to Underground Block Cave Mining," Electron. J. Geotech. Eng, vol. 22, pp. 1733-1745, 2017.
B.S.A. Tatone, "Quantitative Characterization of Natural Rock Discontiunity Roughness In-Situ and in The Laboratory". Master of Applied Science, Graduate Departement of Civil Engineering, University of Toronto, 2009
G. Budi, et.al ,"Evaluation of Shear Strength of Model Rock Joints by Experimental Study". IJRET. International Journal of Research in Engineering and Technology,2014.
H.D. Sutoyo,"Pengaruh Kekasaran Bidang Diskontinu Terhadap kuat Geser Batugamping Klastik dari Kecamatan Bayat, Kabupaten Klaten, Provinsi Jawa Tengah", UPN "Veteran" Yogyakarta, 2019.
H.S. Jang, and B.A. Jang,"New Method for Share Strength Determintation of Unfilled Unweathered Rock Joint",Rock Mech Rock Eng DOI 10.1007/s00603-014-0660-3. Springer-Verlag Wien,2014.
Kartini., Jackie., G.M. Simangunsong, and B. Sulistianto,"Pengaruh Kekasaran Bidang Diskontinu Pada Hasil Uji Geser Langsung Model Kekar Batuan di Laboratorium". Workshop & Seminar Nasional Geomekanika III. Jakarta,2015.
M.A. Rai, S.Kramadibrata, R.K. Wattimena,"Mekanika Batuan". Laboratorium Geomekanika dan Peralatan Tambang, ITB, Bandung, 2014.
N.R. Barton,"The Shear Strength of Rock and Rock Joints", Int. J. Rock Mechanic, Min. Sci. & Geomech,1976
N.R. Barton,"Shear strength criteria for rock, rock joints, rockļ¬ll and rock masses: Problems and some solutions". International Journal of Rock Mechanics and Geotechnical Engineering,2013.
R.E. Goodman,"Determination of The in-situ Modulus of Deformation of Rock", Deformability of Joints Symposium, American Society for Testing Materials,1970.
S.D. Priest,"Discontinuity Analysis for Rock Engineering". Chapman & Hall, London, page 259-297, 1993.
S.G. Du, H. Gao,Y. Hu,Y., M. Huang, and H. Zhao, "A New Method for Determination of Joint Roughness Coefficient of Rock Joint", School of Civil Engineering, Shaoxing University, China,2015.
S.Saptono,"Studi Kekuatan Geser Terhadap Pengaruh Kekasaran Permukaan Diaklas Batugamping",Prosiding Seminar Nasional Kebumian Ke-7. Jurusan Teknik Geologi, Fakultas Teknik, Universitas Gajah Mada, 2014
DOI: https://doi.org/10.31284/j.jemt.2023.v3i2.4131
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Diana Irmawati Pradani
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.