Analysis of The Relationship of Shipment Time and Productivity of Drilling Equipment and Transportation, Java Province

Eko Purnomo, Yazid Fanani, Avellyn Shinthya Sari

Abstract


PT. Agung Satriya Abadi is engaged in mining sand and stone which is formed by weathering deposits, located in Wonosunyo village, Gempol District, Pasuruan Regency, East Java. Companies that run in this category of rock mining generally have quite complex problems, one of which is in terms of time management which is considered less attention by some rock mining companies. In this study, several analyzes will be carried out and run the scientific method.The analysis carried out in this study uses statistical methods by displaying mathematical modeling and analysis of the relationship between circulation time and productivity in linear regression analysis. The data values that arise from the use of this mathematical-statistical method are the value (R2) = 0.8597 or 85% of the Doosan Giant Dx 520 Lca, then the value (R2) = 0.8459 or 84% of the Doosan Giant 300 Class, then Hino Ranger 500 Fm 260 Ti paired with Doosan Giant Dx 520 Lca has a value of (R2) = 0.9868 or 98%. And lastly, the Hino Ranger 500 Fm 260 Ti paired with the Doosan Giant 300 Class has a value of (R2) = 0.9886 or 98%.The data generated from each distribution time and productivity relationship from Doosan Giant Dx 520 Lca generates a difference value = 13,031 m3/hour, Doosan Giant 300 Class gives a difference value = 31.347 m3/hour, Hino Ranger 500 Fm 260 Ti against Doosan Giant Dx 520 Lca raises the difference value = 1,659 m3/hour, Hino Ranger 500 Fm 260 Ti against Doosan Giant 300 Class raises the difference value = 1,492 m3/hour.

Keywords


Cycle Time, Linier Regression, Productivity

Full Text:

PDF

References


Adisoma, G.S., S. Waterman (2001). “Reserve Modeling For Mining Geology”. Yogyakarta: Indonesian Association of Geologist.

Doosan. (2019). Materials and spesifications are subject to change without notice.

Dr. Ir. Waterman Sulistyana B., M.T. (2010). “Perencanaan Tambang”. Yogyakarta: UPN “Veteran” Yogyakarta Jurusan Teknik Pertambangan.

Georus Indonesia (2017). “Statigrafi Jawa Timur Pulau Jawa”. (http://georus-indonesia.blogspot.com/2017/02/stratigrafi-jawa-timurr.html). Diakses pada 21 Februari 2020 Jam 15.23 WIB.

Halimi, B., S.T. (2018). “Optimasi Alat Penambangan Pada Batuan Andesit di Tambang Terbuka Batu Andesit PT. Bina Nugraha Utama, Pasuruan, Jawa Timur”. Surabaya: Institut Teknologi Adhi Tama Surabaya.

Haryanto, Y.W. (1992). “Pemindahan Tanah Mekanis Bagian 1”. Yogyakarta: Universitas Atma Jaya.

Hino Truck. (2018). Spesifications and options may differ depending on each country due to regulations or special requiremenrs.

Ir. Yanto Indonesianto, M. Sc. (2011). “Pemindahan Tanah Mekanis”. Yogyakata: UPN “Veteran” Yogyakarta Jurusan Teknik Pertambangan.

Rustandi, E., De Keyser, F. (1993). “Peta Geologi Lembar Ketapang, Kalimantan”. Bandung: Pusat Penelitian dan Pengembangan Geologi.

N Sukandarrumidi. (2016). “Bahan Galian Industri”. Yogyakarta: Gajah Mada University Press Anggota IKAPI.




DOI: https://doi.org/10.31284/j.jemt.2021.v2i1.2172

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Eko Purnomo, Yazid Fanani, Avellyn Shinthya Sari

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.