VARIASI ARUS DAN SUDUT PENGELASAN PADA MATERIAL AUSTENITIC STAINLESS STEEL 304 TERHADAP KEKUATAN TARIK DAN STRUKTURMAKRO

Vuri Ayu Setyowati, Suheni Suheni

Abstract



Keywords


Pengelasan SMAW; Kekuatan Tarik SS 304 dan SS 304L; Analisa struktur makro

References


Yuan, X., et al., Influence of annealing temperature on mechanical properties and microstructures of a high manganese austenitic steel. Journal of Materials Processing Technology, 2015. 217: p. 278-285.

Luder, D., et al., Failure analysis and metallurgical transitions in SS 304L air pipe caused by local overheating. Engineering Failure Analysis, 2016. 59: p. 292-303.

Totten, G.E., Steel heat treatment: metallurgy and technologies. 2006: CRC press.

Supriyanto, Y.A.B., Kajian Pengaruh Tempering terhadap Sifat Fisis dan Mekanis Pengelasan Stainless Steel. Jurnal Teknik, 2012. VOL. 2.

Ma, F.Y., Corrosive Effects of Chlorides on Metals, Pitting Corrosion. 2012, InTech.

Zheng, H., et al., Study on microstructure of low carbon 12% chromium stainless steel in high temperature heat-affected zone. Materials & Design, 2010. 31(10): p. 4836-4841.

Setiawan, A. and Y.A.Y. Wardana, Analisa Ketangguhan dan Struktur Mikro pada Daerah Las dan HAZ Hasil Pengelasan Sumerged Arc Welding pada Baja SM 490. Jurnal Teknik Mesin, 2006. 8(2): p. pp. 57-63.

Kumar, S. and A. Shahi, Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints. Materials & Design, 2011. 32(6): p. 3617-3623.

Yakub, Y., Variasi Arus Listrik terhadap Sifat Mekanik Mikro Sambungan Las Baja Tahan Karat AISI 304. E-journal Widya Eksakta, 2013. 1(1).

Naharuddin, N., A. Sam, and C. Nugraha, Kekuatan Tarik dan Bending Sambungan Las pada Material Baja SM 490 dengan Metode Pengelasan SMAW dan SAW. Jurnal MEKANIKAL, 2015. 6(1).

Unnikrishnan, R., et al., Effect of heat input on the microstructure, residual stresses and corrosion resistance of 304L austenitic stainless steel weldments. Materials Characterization, 2014. 93: p. 10-23.

Tseng, K.-H. and C.-Y. Hsu, Performance of activated TIG process in austenitic stainless steel welds. Journal of Materials Processing Technology, 2011. 211(3): p. 503-512.




DOI: https://doi.org/10.31284/j.iptek.2016.v20i2.40

Refbacks

  • There are currently no refbacks.