Design of Preventive Maintenance System for A Product Design Lab using Reliability Centered Maintenance (RCM) Methodology

Bintang Rachel Aprilia Marpaung, Yosef Manik, Benedikta Anna Haulian Siboro

Abstract


The product design and innovation laboratory, which is still relatively new, does not yet have a maintenance model to anticipate damages that may occur in the future. The purpose of this research is to build preventive maintenance to anticipate unwanted events such as sudden damage and Standard Operational Procedure (SOP) for laboratory facilities. The method used is Reliability Centered Maintenance (RCM) using EasyFit 5.5 software, obtained a repair schedule with minimum downtime. The results of the Reliability Centered Maintenance (RCM) method obtained maintenance recommendations in the form of Condition Directed (CD) on 14 components that might damage the product design and innovation laboratory facilities, Finding Failure (FF) on 8 components that might damage the design laboratory facilities. products and innovations and Time Directed (TD) on 5 components that may cause damage to product design and innovation laboratory facilities, and also Based on the results of preventive maintenance built, there is a Standard Operational Procedure (SOP) which includes the use of laboratory facilities following work instructions for the use of equipment, use of facilities the laboratory follows the work instructions for use, all validation results must be stored in the form of records in the form


Keywords


downtime; product design and innovation laboratory; preventive maintenance; Reliability Centered Maintenance; Standard Operational Procedure

Full Text:

PDF

References


Depdiknas, SPTK-21, Jakarta: Depdiknas, 2002.

I. T. Del, “Institut Teknologi Del,” 24 November 2020. [Online]. Available: https://www.del.ac.id/?p=11677.

M. Nasir, “Pendidikan Tinggi Berkualitas: "Mendorong Kemajuan IPTEK, Inovasi, dan Daya Saing Bangsa di Era Revolui Industri 4.0",” RISTEKDIKTI, Bandung, 2018.

C. E. Marbun dan B. A. H. Siboro, “Perancangan Meja dan Kursi Komputer Sesuai Dengan Sistem Smart Class pada Laboratorium Desain Produk dan Inovasi Institut Teknologi Del,” Jurnal Teknik Industri Vol. 10 No. 3, 2020.

H. H. Sinaga, B. A. H. Siboro dan C. E. Marbun, “Desain Meja dan Kursi Tutorial Laboratorium Desain Produk dan Inovasi Menggunakan Metode 12 Prinsip Ergonomi dan Pendekatan Antropometri,” Vol. 23 No. 1 (2021): JSTI

Volume 23 Number 1 January 2021, 2021.

J. Tesalonika, B. A. H. Siboro dan C. Marbun, “Perancangan stasiun kerja instruktur laboratorium desain produk dan inovasi menggunakan metode ergonomic function deployment,” Journal of Applied Industrial Engineering 2021, 13(2), pp. 148-158, 2021.

A. Emda, “Laboratorium Sebagai Sarana Pembelajaran Kimia Dalam Meningkatkan Pengetahuan dan Keterampilan Kerja Ilmiah,” Lantanida Journal, 2014.

D. Manesi, “Penerapan Preventive Maintenance untuk meningkatkan Kinerja Fasilitas Praktik Laboratorium Prodi Pendidikan Teknik Mesin Undana,” Jurnal Teknologi, FST Undana ISSN: 1693-9522, p. No. 4 Volume 3, 2015.

R. Yazmendra, “Perencanaan Dan Penerapan Preventive Maintenance Peralatan Laboratorium,” Jurnal Teknik Mesin Vol. 2, No 2, pp. ISSN 1829-8958, Desember 2005.

Y. Rosa, “Perencanaan dan Penerapan Preventive Maintenance Peralatan Laboratorium,” Jurnal Teknik Mesin Vol. 2, No 2, pp. 108-116, Desember 2005.

E. Nainggolan, “Penerapan Metode Reliability Centered Maintenance menggunakan Software SPSS pada Sistem Pendingin Generator Misthubishi Kapasitas 62500 kVa (Study Kasus di PT. Toba Pulp Lestari. Tbk),” Skripsi Universitas Sumatera Utara, 2017.

A. J. Tondang, “Perencanaan Perawatan Mesin menggunakan Metode Reliability Centered Maintenance (RCM) dan FMEA pada PTPN II PG Kwala Madu,” Skripsi Universitas Sumatera Utara, 2016.

A. M. Smith, Realibility Centered Maintenance, New York : McGraw-Hill Inc., 1993.

K. A. Y. R. P. Hendro Asisco, “Usulan Perencanaan Perawatan Mesin dengan Metode Reliability Centered Maintenance (RCM) di PT. Perkebunan Nusantara VII (PERSERO) Unit Usaha Sungai Niru Kab. Muara Enim,” Kaunia, Vol. %1 dari %2Vol. VIII, No. 2, pp. 78-98, 2012.




DOI: https://doi.org/10.31284/j.iptek.2021.v25i2.2369

Refbacks

  • There are currently no refbacks.